FA

BASADUR® E114

Primer| Solvent-based| Damp Substrate

BASADUR®-E114 is a solvent-based and moisture-resistant epoxy primer. BASADUR®-E 114 epoxy primer is recommended for use on fresh concrete surfaces and substrates where moisture may leak. BASADUR®-E 114 epoxy primer significantly increases the adhesive strength of the epoxy flooring system compared to general primers byproviding high resistance against delamination and blistering.

BASADUR®-E 114 epoxy primer is recommended to increase the adhesion to the floor in situations where thesubstrate is greasy or contaminated, and it is not possible to clean it.

This epoxy primer, like other BASA Polymer’s epoxy primers, is two-component but because of its special chemical structure, the adhesive strength of this primer is much higher compared to general primers. This is the reason why it has a higher resistance to vapor pressure, and therefore it is less likely to blister or delaminate from the substrate in certain conditions such as the presence of moisture or oil. Note, since the amount of vapor pressure changes according to the conditions in the place, the use of this product cannot guarantee upcoming problems in the future.

However, in certain circumstances where it is not possible to wait for the substrate to dry, the use of this product greatly reduces the risks associated with the presence of moisture or oil in the substrate.